USB connection not available. Each digital output of the IO part is a volt free contact clean contact and can be driven separately by the Abilis. Power is supplied by usb cable ; two channels device require an external 5V-DC power supply. It can be configured as clean contact input default or optoisolated input use voltages in the range 5V – 12V. It supports a maximum switching current of 1 A transition current during the relay closure , a maximum carrying current of 2 A after the relay closure, when the relay is stable , V DC max.
|Date Added:||4 December 2016|
|File Size:||59.84 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Each input of the IO part is separated. Jumpers position on PCB.
Aethra, SpA. Drivers Download
Each board allows to plug up to 16 sim cards. Only the central pins 4,5 and 3,6 are switched! Each input can be manually configured through its corresponding couple of jumpers. Citobox trimmers and starmocem. The volume of the microphone and the speaker can be manually regulated with the corresponding trimmers, all of which are externally accessible on the front.
They are managed by two separated PIC microcontrollers: This device checks the keepalive, so if the master Mx doesn’t reply to the keepalive signal, the link is assumed to be down and the line is switched to the backup device Bx until the link is up again.
Jumpers configuration only for PCB Ver.
Each digital output of the IO part is a volt free contact clean contact and can be driven separately by the Abilis. Its digital inputs are only compatible with volt free outputs clean contacts. Led Meaning State Power Power state. Abilis software is correctly driving the device. This timer is not programmable and its default value is 10 minutes. This port provides a fast 8-bit bus, where it is possible to connect more slave peripherals.
Up to 6 modems can be installed into the same Abilis. Citobox – Block ueb. The PCB version is reported on the case label. Note Only the central stagmodem 4,5 and 3,6 are switched!
Aethra, SpA. Drivers Download for Windows 10, 8, 7, XP, Vista
The speaker and the microphone are decoupled by a transformer. If the sim is remote this doesn’t happen; a module resets itself every time a remote sim is connected. Warning Output relays support: The digital outputs are relay-based and have 3 volt free contacts i. This device allows to exchange data and sms using an UMTS key.
Power is supplied by usb cable. USB connection not available. Each output is available both as normally closed and normally open. Citobox allows to connect Abilis to a doorphone system integrating it with your computer telephony system. The digital aetnra can drive any kind of device, accordingly with the electrical specifications.
When a continuous or alternate voltage voltange range 2. Each input will cause to dial a different number.
Auxiliary pin, leave disconnected if unused connect to MIC in a special BTicino connection scheme, in order to provide power to the Microphone line. The status of the relays RA and RB follows the one of the communication.
Led indications for Aethra Starmodem. Physical and electrical specifications. Pins 1,2 and 7,8 are not connected.